Instruction Manual

1
2
Installation guide
48MM25kg
10"- 40"
200x200
Model No.:WLB078
Swivel
STEP1-B
Wood Stud Mounting
EN
EN
Solid concrete mounting
Wood stud
60mm
Φ1/8”(3.5mm)
60mm
Φ7/16”(10.5mm)
10
-5
B1(3PCS)
B3(3PCS)
B2(3PCS)
Wall plate
Safety bolt
Concrete Wall
B2
B1
B3
Concrete Wall
B1
B3
Wood stud
STEP1-A STEP3
Hang the TV onto the wall plate
EN
A2(4PCS)
M4X12MM M5X12MM
A3(4PCS)
M6X12MM
A1(4PCS) A4(4PCS)
M8X16MM
A5(4PCS)
Attaching the VESA plate to the monitor
EN
STEP2
CAUTION
This product contains small items that could be a choking hazard if swallowed.Keep these items away from young children.
● Make Sure these instructions are read and completely understood before attempting installation.If you are unsure of any part of this installation,please contact a professional
installer for assistance.
● The wall or mounting surface must be capable of supporting the combined weight of the mount and the display,otherwise the structure must be reinforced.
● Safety gear and proper tools must be used.A minimum of two people are required for t
his installation.Failure to use safety gear can result in property damage,serious injury or
death.
● please check joint parts every two months,making sure the screws are loosened or not.
This product was designed to be installed on wood stud walls and solid concrete walls.Before installing, make sure the wall will support the combined load of the equipment and
hardware.Never exceed the maximum load capacity 25 KG,or else it may result in product failure or personal injury.
Note:this product is intended for indoor use only.Use of this product outdoors could lead to pr
oduct failure or personal injury.
If using screw A1 / A2, use A5,
If using screw A3 / A4, don’t use A5
TV plate
Wall plate
TV plate
Safety bolt
A1-A4
A5
-20°~20°