User's Manual

User Manual for Product Model: NB24G175V3 Page 6 of 7
5 Sensor Generic Specifications
Sensor Specifications & Functions
Value
Unit
Operating Conditions
Frequency Band
24.05 – 24.25
GHz
Power Dissipation
<5
W
Vehicle Network Interface
CAN2.0B
Operating Temperature
-40C to +85
C
Input Operating Voltage
8 – 16
V
RF Output Power
13.5
dBm peak
Operating Life
15 years
Waveform Parameters
Cycle Time
80
ms
Bandwidth
<200
MHz
Physical Parameters
Size
95x63x16.3
mm
Weight
<150
g
Vehicle Physical Interface
6 pin Yazaki connector
Performance Parameters
Detection Range for RCTA
2 – 60
m
Detection Range for BSD
.5 – 14
m
Detection Range for LCA
4 – 80
m
Field of View for RCTA
+/-65
degrees
6 Sensor Features
The BSD algorithm detects and reports “Objects of Interest" on either side of the vehicle, within a
specified “blind spot” zone. The feature generates a signal which is used to drive a visual display placed
in the outside view mirror to alert the driver to the presence of objects of interest within the defined
SBZA zone.
The LCA algorithm detects and reports to the driver that a highway licensable vehicle is rapidly
approaching the host vehicle in one of the adjacent lanes. The feature generates a signal which is used
to drive a visual display placed in the outside view mirror and/or request a chime or vibrating seat
cushion, to alert the driver to the approach of objects of interest within the defined LCA zone.
The RCTA algorithm detects and reports “Objects of Interest” behind the host vehicle, within a specified
RCTA coverage zone. The feature generates a signal which is used to drive a visual display to alert the
driver of the presence of objects of interest that may cause a collision with the host vehicle within the
defined RCTA zone.