Data Sheet

The diagram shows power injection at the
Camera end, using a PSU for HIGHWIRE
Powerstar Duo, with no power delivery over
coax. This option allows the maximum POE
power output.
POE POWER BUDGET TABLE
POWER SUPPLY TO DUO
Application Diagram
HIGHWIRE Powerstar Duo
allows one analogue camera
to be replaced with two
IP cameras
POE over Coax or Local Power
In the simplest implementation (shown
below left) the BASE unit receives
power from a standard POE switch or
Veracity’s 57V DC PSU and transmits
POE over the coax. The DUO unit
receives this power and delivers up
to 25 watts shared between two IP
cameras. No external power cabling
is required, and all detection and setup
occurs automatically. For higher POE
power budgets, an optional Veracity
57V DC PSU may be used to power
the DUO locally at the camera end
(shown below right) delivering 40 watts
or 78 watts depending on PSU model.
See POE budget table for details.
POE AVAILABLE FROM HIGHWIRE POWERSTAR DUO
PSU LOCATION POWER SUPPLY POE POWER BUDGET
(To IP Cameras)
Base End POE Switch 10W
Base End POE Plus Switch 20W
Base End VPSU-57V-800 25W
Camera End VPSU-57V-800 40W
Camera End VPSU-57V-1500 78W
The table shows the total POE power budget available from the two ports on
the HIGHWIRE Powerstar Duo. Note that the maximum power available from
any one port is 25W.
www.veracityglobal.com
IMAGINATION | INNOVATION | INTEGRATION DATASHEET
POWER
SUPPLY
NETWORK
SWITCH
Ethernet Data Only
VHW-H W VHW-HWPS-C2
12V DC
VPSU-12V-U
Ethernet & POE
VPSU-57V-800
or
VPSU-57V-1500
POWER
SUPPLY
Up to 350M on RG-59 500M on RG-11
Data Only, No POE over COAX
CAMERA
CAMERA