Installation Guide

Assembling the panel
STEP 1
Install first post with concrete (See “Digging postholes” and fig. 2).
STEP 2
Slide the bottom rail into place at the bottom of the routed
post (fig. 3).
STEP 3
Install the second post into the ground and temporarily secure
into place. Set the bottom rail into the second post and level (fig. 4).
(You will secure the second post with concrete in Step 7.)
STEP 4
Slide one U-channel onto the first picket and center it vertically.
Place the bottom of the first picket (with U-channel attached)
securely into the channel of the bottom rail and slide against the
first post (fig. 5). The U-channel should be between the post and
the picket.
STEP 5
Continue installing each picket. The pickets feature a tongue-and-
groove design so that each picket fits securely into the one next
to it. Repeat with each picket until there is one picket left (fig. 6).
STEP 6
Slide the second U-channel onto the last picket and center it
vertically. Install the last picket (fig. 7).
STEP 7
When all pickets have been placed, secure the top rail to the top
routed hole in the first post. Working from one side to the other,
slide the rail over the picket(s). In order to fasten the rail into the
second post, shift the post slightly until the rail can be fitted (fig 8).
Once the rail is securely locked in, the pickets will form a solid
panel.
Backfill the second post with concrete and make sure it’s set
before moving down the fence line. This will always allow one post
to be anchored while each panel section is assembled. To continue
building your fence line, repeat Steps 1-7.
OverlandStep1.ai
WoodbridgePrivStep3.ai
fig. 4fig. 3
PRO SERIES PRIVACY PANEL ASSEMBLY INSTRUCTIONS, CONTINUED
WoodbridgePrivStep4.ai
WoodbridgePrivStep6.ai
Woodbridge2.ai
fig. 6fig. 5
fig. 7
fig. 8
Woodbridge.ai
THE DIAGRAMS AND INSTRUCTIONS IN THIS BROCHURE ARE FOR ILLUSTRATION PURPOSES
ONLY AND ARE NOT MEANT TO REPLACE A LICENSED PROFESSIONAL. ANY CONSTRUCTION OR
USE OF THE PRODUCT MUST BE IN ACCORDANCE WITH ALL LOCAL ZONING AND/OR BUILD-
ING CODES. THE CONSUMER ASSUMES ALL RISKS AND LIABILITY ASSOCIATED WITH THE
CONSTRUCTION OR USE OF THIS PRODUCT. THE CONSUMER OR CONTRACTOR SHOULD TAKE
ALL NECESSARY STEPS TO ENSURE THE SAFETY OF EVERYONE INVOLVED IN THE PROJECT,
INCLUDING, BUT NOT LIMITED TO, WEARING THE APPROPRIATE SAFETY EQUIPMENT.
EXCEPT AS CONTAINED IN THE WRITTEN LIMITED WARRANTY, THE WARRANTOR DOES NOT
PROVIDE ANY OTHER WARRANTY, EITHER EXPRESS OR IMPLIED, AND SHALL NOT BE LIABLE
FOR ANY DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES.
©2020 UFP Retail Solutions, LLC. All rights reserved. UFP Retail Solutions is an affiliate of UFP Industries, Inc.
68956 U.S. Hwy 131, White Pigeon, MI 49099 616.365.4201 11265_7/20
www.ufpi.com