Instructions / Assembly

HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
ITEM #XXXXX
MODEL #XXXXX
Use and Care Guide
Solar Post Cap
TOOLS REQUIRED PACKAGE CONTENTS
Phillips
screwdriver
Post Cap (1)
Installation
Screw (2)
600 mAh Ni-Cd
Rechargeable Battery (1)
Operation
HOW SOLAR WORKS
During the day, the solar panel collects sunlight and converts it into electrical power that is stored in the rechargeable battery (included). At night, the
photocell (light sensing device) senses the absence of light and turns on the light using the electricity stored during the day. The more sunlight the fixture
gets, the stronger the charge will be and the longer the bulb will stay lit.
Solar post cap lights utilize LED technology to provide light. LED bulbs are an efficient source of light compared to other types of bulbs and they rarely need
replacement.
Installation
1
Choosing a location
2
Preparing for installation
□ Choose a location that gets a full day of direct sunlight. Avoid
shaded areas.
□ Ensure the fixture receives a minimum of 8 hours of sunlight per
day to ensure optimal performance at night.
□ Avoid an installation area that is near nighttime light sources,
such as street or porch lights. These light sources may be bright
enough to turn the fixture off.
□ Remove the post cap and screws from the box.
□ Gently remove the protective film from the solar panel.
□ Remove the top portion from the post cap by holding the bottom
and rotating the top counterclockwise.
□ Remove the pull-tab from the battery compartment to activate
the battery.
□ Reassemble the post cap.
3
Installing the post cap
□ Place the post cap on top of your 4x4 post, and secure it with the
screws included in the box.