Instructions / Assembly

ManualsBrandsVeranda ManualsFencingSomerset 6 ft. H x 6 ft. W Privacy Vinyl Fence Panel (Includes 4 Brackets)

Kit contents

Assembling the panel

Note: PicketLock

™

is a patented technology that provides a

glue- and fastener-free connection between the pickets and

rails. You may spray soapy water onto components to help

them slide more easily into their corresponding channels.

A non-marring rubber mallet may also be used to gently tap

components more ﬁrmly into place.

ﬁg. 1 ﬁg. 2

ﬁg. 3

• Take the bottom rail and align one of the pickets with the channel

in the bottom rail. Slide the picket into the channel (ﬁg. 1).

• Begin to insert the remaining pickets into the channel of the

bottom rail (ﬁg. 2). Because the pickets have a tongue-and-

groove design, be sure to insert each in the same direction.

Tightly align the tongue of each picket into the groove of the

next one as they slide into the channel. Continue to slide the

pickets to the opposite side of the bottom rail until all are

inserted into the channel.

• At the top of the panel assembly, slide the second rail over the

top of the pickets (ﬁg. 3).

• The panel assembly is now complete. Please use the brackets

(instructions included) to install panels.

• 2 - rails

• 9 - pickets

6x6 Privacy.eps

(2) Rails

(9) Pickets

6x6 Privacy Panel

Actual size: 68.5"h x 66.875"w

68956 U.S. Hwy 131, White Pigeon, MI 49099 616.365.4201 11223_6/20

www.ufpi.com

6x6 PRIVACY PANEL

ASSEMBLY INSTRUCTIONS

• 4 - mounting brackets

with fasteners*

Items needed

• Soapy water

• Wooden wedge

• Non-marring rubber mallet

• Drill with square bit

*Some models do not include brackets

Summary of content (9 pages)

PAGE 1
6x6 PRIVACY PANEL ASSEMBLY INSTRUCTIONS Kit contents • 2 - rails (2) Rails • 4 - mounting brackets with fasteners* • 9 - pickets *Some models do not include brackets Items needed • Soapy water • Non-marring rubber mallet • Wooden wedge • Drill with square bit (9) Pickets Note: PicketLock™ is a patented technology that provides a glue- and fastener-free connection between the pickets and rails.
PAGE 2
6x6 PRIVACY LATTICE TOP PANEL PRIVACY INSTALLATION PANEL INSTALLATION INSTRUCTIONS INSTRUCTIONS Preparation Items you may need Check local ordinances and regulations before building your fence. Before construction, contact your local utility companies to mark any underground cables and pipelines. In addition, it is a good idea to discuss plans with any neighbors along your proposed fence line.
PAGE 3
6x6 PRIVACY PANEL INSTALLATION INSTRUCTIONS Installing brackets to posts • Prepare the pre-assembled fence panels by sliding the mounting brackets onto the rails with the open space at the top. Slide the bracket fully onto the rail. • While holding the bracket in place, attach one screw into one of the slotted holes. Place the screw at the end of the slot closest to the mounting face of the bracket (fig. 4).
PAGE 4
INSTRUCTIONS D'ASSEMBLAGE DU PANNEAU 6X6 INTIMITÉ Contenu de l'ensemble : • 2 - traverses rails • 4 - supports mounting de brackets montage| with avec fixations* fasteners • 9 - pickets piquets (2) traverses *Certains modèles n'incluent pas de supports (9) piquets Articles nécessaires • Eau savonneuse • Maillet en caoutchouc non marquant Panneau à l'abri des regards 6x6 Privacy Panelindiscrets 6 x 6 Actualcm size:(68,5 68.5"h x 66.
PAGE 5
INSTRUCTIONS D'ASSEMBLAGE DU PANNEAU 6X6 INTIMITÉ Préparation Step 3 Consultez vos ordonnances et réglementations locales avant de bâtir votre clôture. Avant de commencer à construire, veuillez contacter vos compagnies locales de services publics pour marquer tous câbles et pipelines souterrains. C'est aussi une bonne idée de discuter des plans avec vos voisins le long de la ligne proposée de la clôture.
PAGE 6
INSTRUCTIONS D'ASSEMBLAGE DU PANNEAU 6X6 INTIMITÉ Installer les supports aux poteaux • Préparez les panneaux de la barrière préinstallés en glissant les supports de fixation sur les traverses en gardant l'espace ouvert au dessus. Glissez le support complètement sur la traverse. • En maintenant le support en place, fixez une vis dans l'un des trous oblongs. Placez la vis à l'extrémité de la fente la plus proche de la façade de fixation du support (fig. 4).
PAGE 7
INSTRUCCIONES DE ENSAMBLADO PANEL DE PRIVACIDAD 6x6 Un kit incluye • 2 - pretiles (2) pretiles • 4 - soportes de montaje con tornillos* • 9 - estacas *Algunos modelos no incluyen soportes Artículos que se necesitan (9) estacas Panel de privacidad 6x6 Tamaño real: 68.5" A x 66.875" An Ensamble del panel 6x6 Privacy.
PAGE 8
INSTRUCCIONES DE ENSAMBLADO PANEL DE PRIVACIDAD 6x6 Preparación Compruebe ordenanzas y normas locales antes de construir su cerca. Antes de la construcción, póngase en contacto con las empresas locales de servicios públicos para marcar los cables subterráneos y tuberías. Además, es una buena idea hablar sobre estos planes con los vecinos a lo largo de su línea de cerca propuesta.
PAGE 9
INSTRUCCIONES DE ENSAMBLADO PANEL DE PRIVACIDAD 6x6 Cómo instalar los soportes a los postes • Prepara los paneles de cerca preensamblados deslizando los soportes de montaje en las barandas con el espacio abierto hacia arriba. Desliza completamente el soporte sobre la baranda. • Mientras sostienes el soporte en su lugar, instala un tornillo en uno de los orificios ranurados. Coloca el tornillo en el extremo de la ranura más cercano a la cara de montaje del soporte (fig. 4).