Instructions / Assembly

4
1
1
2
2
3
3
4
4
5
5
6
6
For Vinyl Stair Railing Installation:
Closely follow post installation instructions (or sleeve existing wood 4x4).
Mount top post 1" back from edge of landing. Mount bottom stair post 1" back
from stair tread nose. Distance between posts should not exceed 65
3
⁄
3
⁄
3
4
⁄4 ⁄
.
Lock tabs on baluster/spindle must face outer edge of
routed holes in rails as shown (Fig A). Assemble your rail
section by snapping balusters/spindles in rails (Fig B).
Place assembled stair rail section adjacent to your posts
as shown in (Fig A). Measure the distance from fi rst
and last baluster/spindle to the top and bottom posts
making sure distance is equal on both sides of stair rail
section. Clamp in place (Fig B,C).
Align top and bottom angle bracket on post adjacent
to rail. Mark rail at end of bracket repeat on all four
brackets on rail section.
Check for proper bracket angle and mark window
inside bracket (Fig a). Pre-drill angle bracket where
window mark is and add screw to lock angle in place
(Fig b). Repeat on all four brackets top & bottom rails
65
3
⁄4" max
between posts
a.
a.
b.
b.
b.
b.
b.
b.
c.
Lock Tabs
Outer edge holes
a.
b.
b.
b.