Installation Guide

4
4.
5.
When included in kit, place aluminum insert into
bottom rail, then insert bottom rail into bottom
post route hole of  rst post only. Panels with 7"
rails do not require aluminum inserts (Fig. 5).
Attach U-channels to two end boards (Fig. 6).
NOTE:
Attach U-Channel to "tongue" side of  rst board,
and "goove" side of last board.
Fig. 5
Fig. 6
U-Channel
U-Channel
First
Board
Last
Board
3.
Pour 6" of gravel into bottom of both holes and
insert posts. Add concrete to  rst post hole
according to manufacturers instructions to top
of hole (Fig. 4). Ensure  rst post is plumb and
level. Let concrete set making sure panel will be
2" above ground. Do not add concrete to second
hole until later in installation.
Fig. 4
Post
Concrete
Gravel