Installation Guide

5
6.
7.
8.
Insert boards into bottom rail ensuring
U-channels are on both ends. Start from  rst
installed post and work towards second post
(Fig. 7).
For Full Privacy Panels:
Insert the top rail into the  rst top hole post route
then guide over top of boards (Fig. 8).
Proceed to Step 15.
For Lattice Top Panels:
Add the lattice insert over the top of the lattice
(Fig. 9).
Place lattice into the middle rail followed by the
top rail.
Fig. 7
Fig. 8
Fig. 9
Top Rail
Middle Rail
Lattice Insert
Lattice