Manualshelf

Installation Guide

ManualsBrandsVeranda ManualsDeck RailingsPremier Series 8 ft. x 36 in. White PolyComposite Stair Rail Kit with Square Balusters
12345678910
7
8
8
Place top rail fl at on table as shown. Lay the cut bottom rail
on top of the top rail, with the routed holes facing in the same
direction. Line up the routes.
Bottom Rail
Top Rail
Bottom Rail
Top Rail
INCORRECTCORRECT
CORRECT INCORRECT
9
9
Mark the top rail (using the bottom rail and a steel rule as a guide) to the top edge of the rail as shown by the arrows. Make sure to
extend the line out at the angle to the edge of the rail (mark line on "bump" of bottom of top rail on angle, not straight down). Cut the
top rail to the lines using the chop saw set to 32°
Make sure bottom of rails
are fl ush against saw fence.
For angles 31-33° go to Step 12
For angles 26-31 and 33-38 go to Step 10