Installation Guide

ManualsBrandsVeranda ManualsKitchenOttawa Scallop 5 ft. x 4 ft. White Vinyl Drive Fence Gate Kit

Hinge

Upright Cap

Top Rail

Bottom Rail

Pickets

Gate Upright

Material Checklist:

Phillips Head Screwdriver

Safety Glasses

Vinyl Cement

Line Level

ATTENTION:

Before you assemble the gate:

PLEASE TAKE A COMPLETE INVENTORY OF ALL PARTS USING THE KIT CONTENTS.

DO NOT ATTEMPT TO ASSEMBLE THE GATE IF PARTS ARE MISSING OR DAMAGED.

Please do not return the product to the store, for assistance or replacement parts call:

1-800-336-2383



Tape Measure

Drill

#2 Square Drive Bit

Gate Hardware (Hinges/Latch)

Thank you for choosing the Barrette Outdoor Living Fence

Gate. Please read the instructions completely before

assembling your gate. Retain manual and your dated sales

slip for future reference and warranty claims.

Before You Begin…

Check your local zoning laws.

• Local zoning laws and Home Owners Associations may

regulate the location, style and height of your fence or even

require a permit signoff beforehand.

Contact your local utilities companies.

• You must have the utility companies clearly mark your property

for electrical, gas or water lines to avoid puncturing any

unseen underground utilities.

Pay to mark your property line.

• Being proactive will save you time and money from any

disputes from neighbors.

Gate posts require an internal support system for weight-bearing

purposes and therefore wooden inserts or a post stiffener is

required.

Post Spacing will be determined by gate width and hardware.

Purchased Metal Stiffener

Fence Panel

Screw/Nail Together As Shown

Fence Panel

3/4" Actual Thickness

Purchased 1x6x8'

Cut To 4-5/8"

Purchased 1x4x8'

Cut To 3-1/8"