Installation Guide

Installation
1.) For picket top gates:
Insert top and bottom rails into upright routes.
For  at top picket gates:
Insert bottom rail into gate uprights.
3.) Ensure gate is square. Measure from top
left corner to bottom right corner and write
down measurement. Measure from top right
corner to bottom left corner and write down
measurement. Make sure measurements are
equal before installing screws into uprights.
2.) For picket top gates:
Slide all pickets through top rail into bottom rail
to complete gate assembly.
For  at top picket gates:
Insert pickets into bottom rail, slide top rail over
pickets and insert top rail into gate uprights.
4