Installation Guide

4
4.
5.
6.
7.
When included in kit, place aluminum insert into
bottom rail, then insert bottom rail into bottom
post route hole of  rst post only (Fig. 5). Panels
with 7" rails and 8x6 panels do not require
aluminum inserts.
NOTE:
8x8 panels will use aluminum inserts in the
middle rail.
Attach U-channels to two end boards (Fig. 6).
NOTE:
Attach U-Channel to "tongue" side of  rst board,
and "groove" side of last board.
Insert boards into bottom rail ensuring
U-channels are on both ends. Start from  rst
installed post and work towards second post
(Fig. 7).
For Full Privacy Panels (Excluding 8' High):
a. Insert the top rail into the  rst top hole post
route then guide over top of boards (Fig. 8).
b. Proceed to Step 8.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
U-Channel
U-Channel
First
Board
Last
Board