Instructions / Assembly

Post Top Installation
1. Carefully remove the
mounting screw clips
and screws from post
top. Use a straight edge
screwdriver to pry from
the inside edge of the
clip to remove easily
(Fig. 1).
2. Pull plastic battery
tab from battery
compartment to activate
(Fig.1).
3. Secure the post top
using mounting screws
provided and rmly snap
the mounting screw clips
back into place (Fig. 2).
4. Allow the post top to
receive a minimum of
24 hours of sunlight so
the rechargeable battery
can reach maximum
capacity.
Battery
Tab
Fig. 1
Fig. 2
Mounting
Screw Clip
www.barretteoutdoorliving.com