Installation Guide
4
4.
5.
6.
7.
When included in kit, place aluminum insert into
bottom rail, then insert bottom rail into bottom
post route hole of rst post only (Fig. 5). Panels
with 7" rails and 8x6 panels do not require
aluminum inserts.
NOTE:
8x8 panels will use aluminum inserts in the
middle rail.
Attach U-channels to two end boards (Fig. 6).
NOTE:
Attach U-Channel to "tongue" side of rst board,
and "groove" side of last board.
Insert boards into bottom rail ensuring
U-channels are on both ends. Start from rst
installed post and work towards second post
(Fig. 7).
For Full Privacy Panels (Excluding 8' High):
a. Insert the top rail into the rst top hole post
route then guide over top of boards (Fig. 8).
b. Proceed to Step 8.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
U-Channel
U-Channel
First
Board
Last
Board