Instructions / Assembly

5
Vinyl Cement
Upright
Assembly
Vinyl Cement
Fig. 3
a. Apply provided vinyl cement to all inside surfaces of
the uprights where the rails will be installed (Fig. 3).
b. Attach uprights to rails (Fig. 4).
Lay gate components on a smooth,  at and clean
surface. Begin by arranging the rails in the correct
orientations.
For Styles With Two Rails:
a. Slide the pickets/boards into the bottom rail. If
pickets/boards are numbered, follow the sequence
from left to right (Fig. 1).
b. Slide the top rail over the pickets (Fig. 2).
For Styles With Three Rails:
a. Slide the pickets/boards into the bottom rail. If
pickets/boards are numbered, follow the sequence
from left to right (Fig. 1).
b. Slide the middle rail over the pickets/boards.
c. Slide the top rail over the pickets/boards (Fig. 2).
Fig. 1
Fig. 4
Fig. 2
1
Bottom Rail
Pickets
1.
2.
3.