Instructions / Assembly
6
For Open Top Panels with Pickets:
a. Attach middle rail into left side of post route
only then guide rail over boards. Insert top rail
into left post route holes of rst post only
(Fig. 14).
b. Insert pickets down through top and middle
rail (Fig. 15).
NOTE:
Scalloped and Arched panels have pickets/
boards that are numbered. Start from left side
with the #1 picket/board rst.
c. Proceed to Step 8.
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
For 3-Rail (8' High) Privacy Panels:
a. Insert the middle rail into middle post route
holes of rst post only (Fig. 16).
b. Insert top boards into middle rail ensuring
U-Channels are on both ends. Start from rst
installed post and work towards second post
(Fig. 17).
c. Insert the top rail into the rst top hole post
route then guide over top of boards (Fig. 18)
d. Proceed to Step 8.