Instructions / Assembly

For Open Top Panels with Pickets:

a. Attach middle rail into left side of post route

only then guide rail over boards. Insert top rail

into left post route holes of  rst post only

(Fig. 14).

b. Insert pickets down through top and middle

rail (Fig. 15).

NOTE:

Scalloped and Arched panels have pickets/

boards that are numbered. Start from left side

with the #1 picket/board  rst.

c. Proceed to Step 8.

Fig. 14

Fig. 15

Fig. 16

Fig. 17

Fig. 18

For 3-Rail (8' High) Privacy Panels:

a. Insert the middle rail into middle post route

holes of  rst post only (Fig. 16).

b. Insert top boards into middle rail ensuring

U-Channels are on both ends. Start from  rst

installed post and work towards second post

(Fig. 17).

c. Insert the top rail into the  rst top hole post

route then guide over top of boards (Fig. 18)

d. Proceed to Step 8.