Instructions / Assembly

6
Using the 4 holes as a guide, pre-drill and install four
#10 x
3
⁄
3
⁄
3
4
⁄4⁄
" screws to mount the straps to the back of the
upright, being sure to overlap the straps
(except for the
locations where hinges will be installed. These screws will be
added later)
. Repeat this step for each corner (Fig. 12).
Fig. 12
Check the included Boerboel
®
hinge & latch
kit for hardware instructions or visit
BoerboelGateSystems.com to obtain a copy.
11
12