Installation Guide

Composite Fencing Installation Instructions
FOR DOGEAR PICKET INSTALL
Tools Needed:
Supplies:
Prior to installing fencing:
 Prior to digging, confirm location of underground utilities with local
authorities.
 Apply for permits if required by local authorities and codes.
 Local zoning laws, neighborhood associations and/or historic districts may
regulate size, type, placement and ability of fencing. Ensure compliance
prior to installation.
 Due to variation in picket width, minor adjustments to gapping may be
required. Care should be taken to ensure that spacing does not result in
too large of gap at the end posts
For questions or more information please visit
www.fiberonfencing.com
*Brackets
*for Side Mount install
Saw
4” Lag Screw
for Face Mount install
PAGE 1