MSDS

MATERIAL SAFETY DATA SHEET
Fiberon® FENCING
MSDS - Coastal Cedar, Pacific Redwood, Rustic Barnwood, Rustic Cedar, Rustic
Redwood, Weathered Pine,
Page 3 of 6
NOTIFICATION PROCEDURE: None
PROCEDURES IF MATERIAL IS RELEASED OR SPILLED: Where dusty conditions are created as a
result of cutting or sawing, wet down material then sweep or vacuum for disposal. Personnel performing
cleanup must use protective equipment.
ENVIRONMENTAL PRECAUTIONS: Not expected to be a problem.
PERSONAL PRECAUTIONS: See Section 8.
7.) HANDLING AND STORAGE
HANDLING: fiberon® Fencing is not intended for load-bearing or heavy structural applications.
Please consult Fiber Composites’ literature for proper usage. The density of fiberon®
Fencing material is heavier as compared to most traditional lumber products. Therefore,
the user must employ proper handling to prevent damage or injury.
STORAGE: Store fiberon® Fencing away from strong oxidizing agents or combustible material.
8.) EXPOSURE CONTROLS / PERSONAL PROTECTION
VENTILATION: Use and work in a well-ventilated area.
RESPIRATORY PROTECTION: Approved dust respirators must be used for dusty conditions or if
breathing of dusts is probable.
EYE PROTECTION: Safety glasses with side shields or goggles should be worn to protect against dust
particles in the air.
SKIN PROTECTION: No special equipment required. Good personal hygiene should be followed.
SUBSTANCE NAME SOURCE TWA STEL
(Agency) (ppm mg / m
3
) (ppm mg / m
3
)
Wood Fiber Dust
Hardwood OSHA 5
Softwood OSHA 5
Oak Hardwood ACGIH 1