Installation Guide

verandadeck.com
With the top rail fully seated, and using the
top bracket as a guide, mark the location of
the holes. Remove the top rail & balusters
before pre-drilling.
Fully insert all balusters. NOTE: using
extended drill bits is recommended to
prevent damage to the rail, and allow a
more perpendicular driving angle.
Pre-drill the holes with a 1/8 in. bit, angling
slightly upward and inward to allow for
clearance from the rail once repositioned
for securing. Bracket shown for visual
reference only.
Complete the installation by gluing the post
cap in place with a quality
exterior adhesive.
13b
14
16
15
17
Carefully position top rail over baluster.
Lower until balusters are fully inserted.
NOTE: It may be necessary to cut balusters
to achieve the desired height
Insert a baluster into the first and last holes
in the rail.
12 13a