User's Manual Part 1

FloPoint
®
Elite Uroflow System Introducing the FloPoint
®
Elite Uroflow System
User’s Manual page 17
The FloSensor fits into a standard toilet bowl and measures a patient’s urine flow rate
and volume. The ScanPoint
®
Remote gathers patient data measured by the FloSensor
and transmits it to the ScanPoint
®
host computer allowing further analysis and reporting
options. The Remote also tracks other diagnostic information about the internal
functioning of the FloSensor.
Part Name Purpose
Handles
Provide a means for carrying the FloSensor, suspend the
FloSensor in the toilet bowl, and support the disposable funnel.
FloSensor
Measures urine volume and flow rate.
Latch
Allows the FloCharger housing to be closed securely.
Clamshell
Protects the FloSensor and FloCharger from dust and
contaminants when not in use.
FloCharger
Recharges the FloSensor battery
FloPoint
®
Elite
Mounting Bracket
Attaches to the wall, securely holding the FloCharger and a
funnel box 3 feet (0.914 m) or more above the floor.
Funnel Box
Contains 40 disposable funnels for attachment to FloSensor
during uroflow exams.
ScanPoint
®
Remote
Acts as a remote control for starting/stopping the FloSensor. Its
LCD display communicates exam and device status to the user.
The FloSensor transmits exam data to the Remote via a wireless
radio link. The Remote, in turn, downloads this data to a
computer with ScanPoint
®
with QuickPrint software.
Start/Stop button
Starts/stops FloSensor functions for exams and calibration.
LCD display
Displays measurement data and device status.
Microphone
Records voice annotations.
Reset button
A recessed button on the back of the Remote that re-activates
the Remote when it doesn’t self-activate. Occasionally when the
Remote battery has been completely discharged, you may need
to reset the Remote before it can be used again.
ScanPoint
®
Label Writer (Optional Printer)
The ScanPoint
®
Label Writer is an optional component of the FloPoint
®
Elite System. It
prints patient exam data on self-adhesive labels (approximately 2.5” x 6”) that can be
attached to a patient record. The parts and features of the ScanPoint
®
Label Writer are
shown in (Figure 2).