User's Manual Part 2

Managing Exam Results in ScanPoint
®
with QuickPrint FloPoint
®
Elite Uroflow System
page 60 User’s Manual
Status Box symbols have the following meanings:
Item Meaning
Status Indicator
Possible symbols are:
Blue exclamation point: QuickPrint is waiting for you to input
information.
Green check mark: The instrument is ready to use.
Red stop sign: The instrument is performing a process such as
transmitting information to ScanPoint
®
.
Instrument image
A picture of the instrument that is currently transmitting data to
the computer.
Instrument name
The name assigned to the instrument. You can rename the
instrument by clicking on the name and entering a new one.
Using Multiple ScanPoint
®
Docking Stations
If you have more than one FloPoint
®
instrument with multiple Remotes and ScanPoint
®
Docking Stations, you will see one status box for each available device. The currently
active instrument is indicated by a solid border around the status box. To communicate
with a different instrument, click its instrument image in the appropriate status box.
The Message Indicator
This icon indicates the number of ScanPoint
®
messages you have waiting to
be viewed. To view the messages, click the icon. If there is more than one
message, you will be able to move through a scrollable list of message
headings. The messages are “Read Only.” You cannot create a text reply,
although you can select
YES / NO buttons, as appropriate.
Completing an Unannotated Exam
Perform the following steps to complete an exam only if you did not enter a voice
annotation.
If you did enter a voice annotation, see “Completing a Voice-Annotated Exam” on
page 63.
NOTE: The following procedure assumes that you have performed an exam as described
in Performing an Exam beginning on page 51.
If You Did Not Enter a Voice Annotation
1. Place your Remote into the ScanPoint
®
Docking Station connected to your
computer. Exam results are automatically transmitted to ScanPoint
®
. As the
exams are being transmitted to ScanPoint
®
, the Remote display shows the
percentage of the data that has been transferred.