Safety data sheet

ManualsBrandsVERBATIM Manuals3D PrintingFilament ABS plastic 1.75 mm White 1 kg

Page 1 of 5

Material Safety Data Sheet

Issued on April 24 2015

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product name: ABS Filament for 3D Printer

55000

812

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG BLACK

55001

812

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG WHITE

55002

812

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG BLUE

55003

812

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG RED

55004

812

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG GREEN

55006

812

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG SILVER/METAL GREY

55010

812

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG BLACK (n)

55011

812

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG WHITE (n)

55012

812

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG BLUE (n)

55013

812

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG RED (n)

55014

812

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG GREEN (n)

55016

812

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG SILVER/METAL GREY (n)

55017

812

VERBATIM 3D PRINTER FILAMENT ABS 2.85MM 1KG WHITE (n)

55018

812

VERBATIM 3D PRINTER FILAMENT ABS 2.85MM 1KG BLACK (n)

Brand: Verbatim

Company name: Mitsubishi Kagaku Media Co., LTD.

Address: Daini Ryumeikan Bldg. 8F 3-20, Kandaogawmachi,

Chiyoda-ku, Tokyo 101-0052, Japan

Department: Archive Business Development Department

Telephone: +81-3-5577-3095

Fax: +81-3-3295-0680

Reference number: 3DF-150421-01E

Recommended use and restriction on use: 3D Printer Filament for Material Extrusion

type

2. HAZARDS IDENTIFICATION GHS Classification:

Physical hazards: Classification not applicable

Health hazards: Classification not applicable

Environmental hazards Classification not applicable

Summary of content (9 pages)

PAGE 1
Material Safety Data Sheet Issued on April 24 2015 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product name: ABS Filament for 3D Printer 55000 55001 55002 55003 55004 55006 55010 55011 55012 55013 55014 55016 55017 55018 - 812 812 812 812 812 812 812 812 812 812 812 812 812 812 VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG BLACK VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG WHITE VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG BLUE VERBATIM 3D PRINTER FILAMENT ABS 1.
PAGE 2
GHS Label elements: Pictogram or symbol: Signal word: Hazard statement: Precautionary statement: Safety measures: Response: Not applicable. Not applicable. No relevant information. Do not breathe dust/fume/gas/mist. Get medical attention/advice if you feel unwell. Keep away from fire. Store indoors at ambient temperature. Do not dump into sewers, on the ground or into any body of water. Burn in an adequate incinerator or bury in landfill in accordance with applicable local, state, and federal regulations.
PAGE 3
If in eyes: Immediately rinse the eye with plenty of clean running water for at least 15 minutes. Remove contact lenses, if present and easy to do. Rinse thoroughly the inner side of the eye lid. Get medical attention as soon as possible. If swallowed: If swallowed by accident, keep at rest and get medical attention immediately. Avoid vomit entering into respiratory tract. Do not induce vomiting unless instructed by a doctor.
PAGE 4
8. EXPOSURE CONTROLS/PERSONAL PROTECTION Protective equipment: Respiratory protection: Wear appropriate protective equipment to avoid inhalation or contact of gas generated from high temperature molten resin. Hand protection: Wear protective gloves. It is preferable to wear cotton work gloves or leather gloves when handling the melted resin. Eye protection: Wear protective glasses when handling. Skin and body protection:Wear clothing to avoid direct exposure of skin to molten resin. 9.
PAGE 5
15. REGULATORY INFORMATION Follow all regulations in your country. 16. OTHER INFORMATION The descriptions herein are based on the currently available sources and information but no guarantee is given for the integrity or accuracy regarding the given data and evaluation. The precautions herein are for normal handling. If you use this product under special conditions, take new safety measures appropriate for the use and usage.
PAGE 6
Material Safety Data Sheet Issued on April 24 2015 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product name: ABS Filament for 3D Printer 55010 - 813 VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG BLACK (n) 55011 - 813 VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG WHITE (n) 55012 - 813 VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG BLUE (n) 55014 - 813 VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG GREEN (n) 55017 - 813 VERBATIM 3D PRINTER FILAMENT ABS 2.
PAGE 7
Storage: Keep away from fire. Store indoors at ambient temperature. Do not dump into sewers, on the ground or into any body of water. Burn in an adequate incinerator or bury in landfill in accordance with applicable local, state, and federal regulations. Disposal: 3. COMPOSITION/INFORMATION ON INGREDIENTS Chemical substance/mixture: A mixture Chemical name or generic name: Acrylonitrile-butadiene-styrene Copolymer Chemical properties (chemical formula, etc): No relevant information. Contents: No.
PAGE 8
Do not induce vomiting unless instructed by a doctor. Protection of the person who gives the first aid: Wear appropriate protective equipment (protective glasses, protective mask, gloves, etc.). Provide ventilation. 5. FIRE-FIGHTING MEASURES Suitable extinguisher media: All types of fire extinguisher include water. Specific fire fighting method, protection for fire-fighter: Fight fire responding to the fire in vicinity. Wear appropriate protective equipment (heat-proof clothing, etc.).
PAGE 9
It is preferable to wear cotton work gloves or leather gloves when handling the melted resin. Eye protection: Wear protective glasses when handling. Skin and body protection:Wear clothing to avoid direct exposure of skin to molten resin. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Physical state: Solid (Filament Shape) Melting point: 200-260 °C Combustibility: Product is not self-igniting. Solubility in water: Insoluble 10.