Safety data sheet

ManualsBrandsVERBATIM Manuals3D PrintingFilament PLA plastic 2.85 mm Transparent 1 kg

Page 1 of 7

SAFETY DATA SHEET (SDS)

Issued on: 16 February, 2016

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Trade name: PLA Filament for 3D Printer

Registration number: -

Synonyms: None.

55268

VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG WHITE

55285

VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 750G WHITE

55267

VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG BLACK

55284

VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 750G BLACK

55269

VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG BLUE

55271

VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG GREEN

55273

VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG YELLOW

55272

VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG ORANGE

55270

VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG RED

55274

VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG NATURAL TRANSPARENT

55275

VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG SILVER/METAL GREY

55261

VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG BLUE

55278

VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG BLUE

55281

VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG YELLOW

55276

VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG BLACK

55280

VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG GREEN

55279

VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG RED

55277

VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG WHITE

55283

VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG SILVER/METAL GREY

55282

VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG NATURAL TRANSPARENT

1.2. Relevant identified uses of the substance or mixture and uses advised against

Identified uses:

3D Printer Filament for Material Extrusion type.

Uses advised against: None known.

1.3. Details of the supplier of the safety data sheet

Company name: Verbatim GmbH

Address: Dusseldorfer Str. 13 D-65760 Eschborn Germany

Telephone: +49 (0) 6196 9001 49

Contact person: Quality Assurance & RMA Management

E-mail: SDS@verbatim-europe.com

1.4. Emergency telephone number +49 (0) 6196 9001 0

Summary of content (7 pages)

PAGE 1
SAFETY DATA SHEET (SDS) Issued on: 16 February, 2016 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Trade name: PLA Filament for 3D Printer Registration number: Synonyms: None. 55268 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG WHITE 55285 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 750G WHITE 55267 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG BLACK 55284 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 750G BLACK 55269 VERBATIM 3D PRINTER FILAMENT PLA 1.
PAGE 2
. HAZARDS IDENTIFICATION 2.1. Classification of the substance or mixture The mixture has been assessed and/or tested for its physical, health and environmental hazards and the following classification applies. Classification according to Regulation (EC) No 1272/2008 as amended This substance does not meet the criteria for classification according to Regulation (EC) 1272/2008 as amended. Hazard summary: Not available. 2.2. Label elements Label according to Regulation (EC) No.
PAGE 3
SECTION 3: Composition/information on ingredients General information Chemical substance/mixture: A mixture Chemical name or generic name: Polylactide resin Chemical properties (chemical formula, etc): No relevant information. Contents: No.
PAGE 4
SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures For non-emergency personnel: Keep unnecessary personnel away. For personal protection, see section 8 of the SDS. For emergency responders: Keep unnecessary personnel away. Use personal protection recommended in Section 8 of the SDS. 6.2. Environmental precautions: Avoid discharge into drains, water courses or onto the ground. 6.3.
PAGE 5
SECTION 11: Toxicological information General information: Occupational exposure to the substance or mixture may cause adverse effects. Information on likely routes of exposure Inhalation: No adverse effects due to inhalation are expected. Skin contact: No adverse effects due to skin contact are expected. Eye contact: Direct contact with eyes may cause temporary irritation. Ingestion May cause discomfort if swallowed. However, ingestion is not likely to be a primary route of occupational exposure.
PAGE 6
13.1. Waste treatment methods Residual waste: EU waste code: Disposal methods/information: Special precautions : Dispose of in accordance with local regulations. The Waste code should be assigned in discussion between the user, the producer and the waste disposal company. Do not dump into sewers, on the ground or into any body of water. Burn in an adequate incinerator or bury in landfill in accordance with applicable regulations. Dispose in accordance with all applicable regulations.
PAGE 7
Other regulations: The product is classified and labelled in accordance with EC directives or respective national laws. This Safety Data Sheet complies with the requirements of Regulation (EC) No 1907/2006, as amended. National regulations: Follow national regulation for work with chemical agents. 15.2. Chemical safety assessment: No Chemical Safety Assessment has been carried out. SECTION 16: Other information List of abbreviations: References : Not available.