User manual

3.10.4 Close Session
Selecting “Close Session” will make the disc close and you cannot write any additional data to it.
This function is required to allow the disc to be read on normal player.
10-04. Edit Track
Close Session Press “ENT” button to close session; “ESC” button to
bring you to next setting.
Close all disc’s
session? Yes System will ask a confirmation to close the disc’s
session. After this step, the disc cannot have additional
data written to it.
Closing Session
Please wait--- LCD will show the progress of the disc closing.
Closing Complete
OK :3 Fail :0 When closing session is finished, the LCD will show the
number of discs “OK” and “Fail” message.
3.11 Setup
This function contains a list of options that allow user to change the original default settings. As
there are different settings under the setup function to control the duplicator’s operation, we
suggest using the original default settings for optimal operation.
11. Setup Press “ENT” button to enter the “Setup” function.
3.11.1 Language (optional)
Use this option to set which language is shown on the LCD. There are English, Traditional
Chinese, Simplified Chinese and Japanese languages.
11-01. Setup
Language Press “ENT” to change the setting and “ESC” to exit.
3.11.2 Burn Speed
This setting controls the maximum writing speed of CD writers.
Default setting is “Auto” which will use the highest writing speed of the writers. Sometimes
maximum writing speed will cause high failure rates that may be due to poor CD quality or
unstable CD writing in high speed. Under these circumstances, please lower the writing
speed under this setting to get higher successful rate in CD writing.
11-02. Setup
Burn Speed
Press “ENT” to enter the setting and “ESC” to exit.
Burn Speed
24X Use arrow buttons to change the burning speed then
press “ENT”. (Depending on the CDRW drive maximum
speed support)