User manual

3.11.3 Read Speed
Sets the reading speed of the target source CD-ROM.
11-03. Setup
Read Speed Press “ENT” to enter the setting and “ESC” to exit.
Read Speed
32X Use arrow buttons to change the reading speed then
press “ENT”. (Depends on the CDROM maximum speed
support)
3.11.4 Auto Start Drive
Use this setting to auto start copy or test when the blank discs are inserted into the CD/RW
drives. Default setting is “Off”.
11-04. Setup
Auto Start Drive
Press “ENT” button to enter “Auto Start Drive” and “ESC”
to exit.
Auto Start Drive
Off Use arrow buttons to change “The number” or “Off”
setting then press “ENT” or press “ESC” to go back.
3.11.5 Start up menu
This setting selects one of the menu items which will become the first menu item to show when
turning on duplicator.
11-05. Setup
Startup Menu Press “ENT” button to enter “Startup Menu” and “ESC”
to exit.
Startup Menu
1.Copy Use arrow buttons to select menu item setting for the
first menu item to show (1 to 11 items) then press “ENT”.
3.11.6 Auto Verify
This setting controls On and Off of auto verify for the target. Default setting is “Off”.
11-06. Setup
Auto Verify
Press “ENT” button to enter “Auto Verify ” and “ESC” to
exit.
Auto Verify
Off
Use arrow buttons to change “On” or “Off” setting then
press “ENT” or press “ESC” to go back.