User manual

3.11.7 Auto Compare
This setting controls auto compare of the data between master and target discs after discs copy.
Default setting is “Off”.
11-07. Setup
Auto Compare Press “ENT” button to enter “Auto Compare” and “ESC”
to exit.
Auto Compare
Off Use arrow buttons to change “On” or “Off” setting then
press “ENT” or press “ESC” to go back.
3.11.8 Auto Prescan
This setting controls the auto prescan of the master of the disc and tests the reading speed.
Default setting is “OFF”.
11-08. Setup
Auto Prescan Press “ENT” button to enter “Auto Prescan” and “ESC”
to exit.
Auto Prescan
Off Use arrow buttons to change “On” or “Off” setting then
press “ENT” or press “ESC” to go back.
3.11.9 Eject Disc
This setting controls the ejection of discs by the CD writer. Three options are available: “Eject
Good Only” setting will only eject the passed discs automatically and leave the failed ones in the
CD writers. “Eject All Disc” means the CD writers will eject the CD discs no matter whether the
copy operation is successful or failed. “Do Not Eject” means all discs will remain in CD writers
when the job is done and you will have to eject discs from the CD writers manually.
11-09. Setup
Eject Disc Press “ENT” button to enter “Eject Disc” and “ESC” to
exit
Eject Disc
Eject Good Only
Use arrow buttons to select “Eject Good Only”, then
press “ENT” or press “ESC” to go back.
Eject Disc
Eject All Disc
Use arrow buttons to select “Eject All Disc”, then press
“ENT” or press “ESC” to go back.
Eject Disc
Do Not Eject Use arrow buttons to select “Do Not Eject”, then press
“ENT” or press “ESC” to go back.