User manual

3.11.10 Burn on The Fly
This setting controls the writing methods of the CD writers. When the setting is “On”, the data will
direct copy from source drive to the target drives.
11-10. Setup
Burn On The Fly Press “ENT” button to enter “Burn On The Fly” and
“ESC” to exit
Burn On The Fly
On Using arrow button to change “On” or “Off” setting then
press “ENT” or press “ESC” to go back.
There is no HDD !
The CopySmartPlus has no hard drive, the LCD will
show the message as left.
3.11.11 Burn Mode
This setting controls the writing methods the CD-RW disc including “Disc At Once” (DAO) or
“Track At Once” (TAO). Default setting is “DAO”. Some CD writers may support different writing
methods. If the method selected is not supported, the duplicator will automatically switch to the
other one.
11-11. Setup
Burn Mode Press “ENT” button to enter “Burn Mode” and “ESC” to
exit
Burn Mode
DAO Use arrow buttons to change “TAO” or “DAO” mode
setting then press “ENT” or press “ESC” to go back.
3.11.12 Button Sound
This setting controls button sounds. Default setting is “On”. Press “ENT” button to change and
“ESC” to exit.
11-12. Setup
Button Sound Press “ENT” button to enter “Button Sound” and “ESC”
to exit
Button Sound
On Use arrow buttons to change “On” or “Off” setting then
press “ENT” or press “ESC” to go back.
3.11.13 Device Info
This function will show what devices are connected. Each devices brand and type of information
will be shown on LCD.
11-13. Setup
Device Info Press “ENT” button to enter the device information and
“ESC” to exit.
00 IDE0 Master
CD-ROM：BRAND Use arrows button to select the device or press “ESC” to
go back.