User manual

Chapter 1 Introduction
1.1 Overview
Users who want to backup their CDs normally have go through many steps by turning on their
computer, launching the software, setting up various parameters, and tiding up their computer.
Sometimes it can take up to an hour to get only a few CD backups. A standalone
CopySmartPlus will easily resolve this inconvenience.
CopySmartPlus is a CD-to-CD standalone duplicator and does not need to connect to a
computer. It duplicates almost any format of compact disc with excellent accuracy. With its
professional mechanism design and multi-function LCD panel, CopySmartPlus is easy for any
end-user to operate. It is a perfect cost-effective CD-R duplicator for audio, data, and video
applications. The simple four button control panel is designed to provide copy modes selection
and copy operation.
1.2 Features
• Standalone IDE to IDE CD Copy controller
• 4 (CSP243) / 8 (CSP247) independent IDE channel
• Self system diagnostics when power on
• Auto format detection
• User friendly interface with message rich LCD display
• Supports high speed CD-RW writing mode
• Easy operation without software and training are required
• Firmware upgrade via CD-ROM
1.3 Specifications
Power requirement - voltage : 240V
Environment - Temperature
Operating +5
oC to +50 oC
Storage -20 oC to +50 oC
Dimensions:
CSP3
Length: 436 mm
Width: 190 mm
Height: 270 mm
CSP7
Length: 456 mm
Width: 190 mm
Height: 440 mm
CD Format - CD-ROM (Mode1 & Mode2), CD-ROM/XA (Mode2 form1 & form2), CD-DA, Mixed-
Mode, Video CD, CD-I, Karaoke CD, Photo CD (Single & Multi-session), CD-Extra, HFS,
CDBridge, ISO9660, CD-R, and CD-RW
Writing mode - Auto Detect (DAO, TAO)