User manual

Chapter 2 Installation and Operation Procedure
Unpack the duplicator.
Check the entire unit to see if there is any mal-function or damage found.
Make sure that the voltage setting is correct.
Connect power cable.
Switch on the CopySmartPlus with the front power button.
2.1 Key Functions and Operating Instructions
LCD Display Panel: Displays main functions and all messages.
Scroll up through menus or functions.
Scroll down through menus or functions.
Executes the function which you select.
Cancels the function which you select.
Power on the system. The CopySmartPlus will process a self-test for a few seconds. After the
self-test has completed , the LCD will show:
CD Duplicator or CD Duplicator
1-3 ver: 1.28B 1-7 ver: 1.28T
Initialize SDRAM.....
Detect Drives.....
1. Copy