User manual

3.3 Test & Copy
3.Test & Copy
Press “ENT” button to do the disc testing then
really write the data on the disc or press “ESC”
to exit.
Testing-24X 0%
650.0MB 74:00
Before starting the copying process, the writers will
simulate the data writing process.
Copying-24X 0%
650.0MB 74:00 When testing process is completed, duplicator
will start writing data onto the CD-R/
RW disc. The CD-R/RW discs will contain data.
3.Test & Copy
OK: 03 When the process is finished, the LCD will
show the result of the “Test & Copy”.
3.4 Verify
This will verify if the target discs if can be read correctly in the CD-ROM drive after copying of the
discs. Discs in the CD writer and CD-ROM drive can be verified together simultaneously.
4.Verify
Press “ENT” button to start the disc verify or press “ESC”
to exit.
Verify--24X 0%
650.0MB 74:00 LCD will show the progress of the “Verify” process.
4.Verify
OK: 03
When the process is finished, the LCD will show the
“Verify” result.
3.5 Compare
The data on master and target discs will be compared to each other. This will confirm an accurate
copy has been made.
5.Compare
Press “ENT” button to run the disc compare or
press “ESC” to exit.
Compare-24X 0%
650.0MB 74:00 LCD will show the progress of “Compare” process.