User guide

2120
list, you can alternatively insert the driver CD-ROM from your printer manufacturer
and follow the dialogue for installing a driver from CD.
7. You can verify that the verbatimnas printer has been installed by going to Advanced/
Printers and Faxes. Under Printers and Faxes you will see the verbatimnas printer
icon.
Now your printer is ready to accept print jobs like any other printer on your system.
Attaching a USB Storage Device
You may also use one of the two USB-A ports for attaching another USB storage device,
like a flash drive. Once your storage device is attached and installed to the connected
NAS drive, you can drag and drop files to it like any other storage device.
These types of USB storage devices can be attached:
• Flash Drive
• Hard Drive
• Memory Card Reader
Follow these steps to attach and use your USB storage device:
1. Attach the USB cable from your device (or the USB connector attached to your
device) to one of the USB-A connectors on the rear panel of the NAS drive.
2. If your device is self-powered, turn on the power to your device.
3. Your device should now be visible through your file browser. If it is not immediately
visible it may mean that it is not formatted in a format compatible with the NAS drive.
In this case you must take the additional step outlined in Step 4.
4. You must reformat the device using the administration tool before NAS drive will
recognize it.
BEFORE PROCEEDING, MAKE CERTAIN THAT YOU HAVE SAFELY SAVED ALL OF
YOUR DEVICE’S DATA TO ANOTHER STORAGE DEVICE.
Enter the administration tool and go to the screen at Advanced / Maintenance / Disk
Utility. Highlight your device in the list of devices. Its Mount Point will be /mnt/USBx
where x is a sequence number. Select the FAT32 Format Type in the drop-down menu.