User guide

3130
Address automatically”. With these selections enabled, the NAS drive will act as a DHCP
client and attempt to retrieve its IP Address and its DNS Server Address from the DHCP
server active on your LAN.
Under some LAN environments you will need to enter fixed addresses in the form
provided.
The bottom of this screen displays the Media Access Control (MAC) address of the
product.
When done with this form, press Save to save your settings.
Time Settings
Enter this screen by selecting Advanced / System / Time Settings. You may manually enter
the date, time, and time zone, or alternatively select a Network Time Protocol (NTP) server
available on your LAN. When done with this form, press Save to save your changes.
The Time of Day Clock uses a battery to keep the clock running even while the NAS drive
is powered off.
Turn Off Server
If you have a need to restart or turn off your file server, you may do so using the buttons
available through Advanced / System / Turn Off Server. This is a convenient feature if
your administration computer is located far away from the NAS drive. Otherwise, you can
simply power off the NAS drive to turn off the server.
Information
Basic information about your system, such as the firmware version number and IP
address, can be displayed by selecting Advanced / System / Information. There are no
user settings on this screen.