User manual

9
Installation
2. After finding the PowerBay NAS array, the utility will list the device’s IP address, MAC address and Device
Name. (If the device is not listed on the initial scan you can press the Refresh button to initiate a Re-Scan)
You have three options:
• IP Setup Button: To enter the IP Address Setup.
• Folder Button: To open Windows Explorer to \\PowerBay.
• Browser Button: To link to the device web configuration.
4. Here you can change:
Device Name - Network name of the PowerBay NAS array.
Workgroup - Workgroup name of your network.
IP Address Setup - Edit the IP to fit your network.
Network Interface - Your network adapter.
After the changes you can click OK to apply the changes.
3. After clicking the IP Setup Button you’ll be prompted
to enter the password (The default password is blank)
and click OK.
Product
Overview
Installation
Web
Configuration
Knowledge
Base