User manual

15
Web Configuration
Date and Time - Page
Time Zone:
Choose the Time Zone of
where you are located from
the drop-down menu.
Set from Computer:
To set the internal clock of
the PowerBay NAS array to
the same time as the client
computer, select Set from
Computer and hit Save.
Set the Date
and Time Manually:
To set the date and time
manually, select Set Manually, and fill in the date and time using the drop-down
menus. Press Save to save the new settings.
NTP Server:
Tick the Enable NTP Server checkbox to enable NTP. Network Time Protocol (NTP)
synchronizes the device with an Internet time server. Type the URL of the NTP Server
in the NTP Server checkbox or use the drop-down menu to choose one of the default
time servers listed for your convenience. Press Save to save the new settings.
Device Settings - Page
The device settings page allows you to configure the Workgroup or Active Directory
settings of your network on the device.
If your network is configured as a Workgroup, click the Workgroup radio button.
Configure the parameters as described below:
Workgroup:
The Workgroup is used
by Microsoft Windows
Network to organize
available network groups
within the same network.
Name:
The unique Name appears for other network services including shared libraries on
iTunes and other media players. The name can be used to access your device from
a web browser instead of using an IP address, for example, http://powerbay. By de-
fault the device name is “PowerBay”.
Product
Overview
Installation
Web
Configuration
Knowledge
Base