User manual

16
Web Configuration
Description:
This field assigns a device description to help identify the device in the workgroup.
If your network is configured in an Active Directory, make sure the following condi-
tions are true:
1. Ensure that the Time and Date is synchronized between the device and the Win-
dows Active Directory server. The device and Active Directory server will only
tolerate a maximum time difference of 5 minutes.
2. Ensure that you can get the IP address of the 2008 AD server from the DNS server.
The DNS1 and DNS2 settings are the same as the LAN Setup. Please make sure
this is working properly.
To configure the PowerBay NAS array to use Active Directory, click the Active Direc-
tory radio button and configure the parameters as described below:
User Name:
Input the user name of
an account setup on the
Active Directory that
requires access to the
resources on the device.
Password:
Input the password of the
chosen Active Directory
user account.
Name:
Input a Domain Name
Service (DNS) name for
the PowerBay NAS array.
If the device connecting to the PowerBay NAS array is a browser or logon server
this will be the name that these services are advertised by.
Workgroup:
Enter your Workgroup name here. The workgroup name should be the same as the
computers on the network. Devices using the same workgroup will have additional
file sharing methods available.
Realm Name:
Input the FQDN (Fully Qualified Domain Name) of the Active Directory Domain in
this field. This option specifies the Kerberos realm to use.
AD Server Name:
Input the name of the Active Directory Server in this field. When the Windows user
attempts to access the device at login time, the device will connect to the 2008 AD
Server and attempt to authenticate the given user with the given password.
Product
Overview
Installation
Web
Configuration
Knowledge
Base