User manual

Web Conﬁguration

Quotas - Page

This section allows you

to assign a quota to a

group or user to limit

the amount of storage

they are allocated.

By default, users and

groups do not have a

quota.

Disk Quota Status:

This option enables

or disables disk quota

option.

User Quota Settings:

This section will list the existing users and you can modify the each user’s quota

here. Note that the default value is Unlimited.

Shared Folder Quota Settings:

This section allows you modify the quota for a speciﬁc shared folder.

FTP Server - Page

The device is equipped with a built in FTP Server. The server is easy to conﬁgure

and allows users to access important data whether they are on the local network or

at a remote location. The FTP server can be conﬁgured to allow user access to spe-

ciﬁc directories and will allow up to 10 users to access the device at a time.

FTP Server:

This option allows the

user to enable and dis-

able the use of the FTP

Server on the device.

Max User:

Sets the maximum

number of users that

can connect to the FTP

Server at once.

Idle Time:

Sets the amount of time a user can remain idle before being disconnected.

Port:

Sets the FTP port number. The default is port 21. In order to use FXP (File Exchange

Protocol) for server-to-server data transfer, please make sure to change the port

from 21 to some other port as listed in the Port section of the web UI.

Product

Overview

Installation

Web

Conﬁguration

Knowledge

Base