User manual

29
Web Configuration
Key Management:
Use this page to define how
you want the password key
to be used for unlocking the
encrypted array.
‘Change’ allows you to enter
a new password key.
‘Save’ and ‘Load’ allow you
to store an encrypted key file
“Volume_1.key” onto a com-
puter on the LAN and later
retrieve the file to UNLOCK
a LOCKED array.
‘Mail’ allows the password key string to be e-mailed to all users whose e-mail
addresses have been entered into the Receiver E-mail fields on the E-mail Settings
page. If the administrator forgets the password key, the administrator can recover
the key by mailing it to himself. This feature also means that anyone who discovers
the administrator’s User Interface password can also easily discover the encryption
key.
‘Auto Unlock’ and ‘USB Key’ options are offered again on this page. This gives you
a chance to invoke these options after you have configured the array.
Disk Configuration – Page (Steps)
Here are the steps to configure all the
hard drives (including an attached
eSATA mirroring disk) to run on
RAID 6.
Step 1:
Select the desired RAID configuration.
In the example, we chose RAID 6.
Step 2:
Select the desired file system format.
In the example, we chose ext2.
Product
Overview
Installation
Web
Configuration
Knowledge
Base