User manual

31
Web Configuration
Disk Utilities - Page
S.M.A.R.T. Test:
S.M.A.R.T. (Self-Monitoring,
Analysis, and Reporting
Technology) is a monitoring
service that can diagnose
the health status of a disk
by analyzing certain disk
attributes. The test results
for each disk are shown at
the right.
Scan Disk:
Press the Scan Disk button to initiate a scan of all disks and attempt to detect and
list any errors found. This process can take a long time to complete.
Reformat:
If you want to reformat the array using the currently selected RAID mode, you may
press the Reformat button. You will be warned that reformatting will erase all the
data from your hard drives. Click OK (if you want to proceed).
Power Management - Page
Enabling this feature will cause the hard disk drives to hibernate after the specified
time of inactivity. The hard disk drives will wake-up when new activity is detected.
Power Management:
Enable or Disable power
management.
Turn Off Hard Drives:
Select the amount of
idle time allowed before
the hard drives are shut
down. Remember that the device will stay powered on, only the hard drives lose
power. They will regain power immediately after attempting to access them.
Click ‘Save’ when finished.
Product
Overview
Installation
Web
Configuration
Knowledge
Base