User manual

39
Web Configuration
System - Page
The System menu provides options for system restarts, saving and loading configu-
ration settings, and setting idle times.
Restart:
Click ‘Restart’ to reboot the
PowerBay NAS array.
Defaults:
Click ‘Restore’ to reset the
PowerBay NAS array to
factory default settings.
Use the restore feature
only if necessary since this
will erase all previously
saved settings on the unit.
This process will not harm
or change any data on the
internal drives.
Shutdown:
Press the Shutdown button
to initiate the power down
sequence; this returns the
unit to the standby power
state.
Configuration Settings:
Save configuration settings
by pressing the ‘Save’ but-
ton and then choosing a
destination folder for the
configuration file. The de-
fault name of the configu-
ration file is CfgBackup.
To load previously saved
configuration settings,
‘Browse’ to the configura-
tion file and then press the
‘Load’ button.
Idle Time:
Enter a value for the System Inactivity Timer. If the administrator is idle for longer
than the specified time, he/she will be logged out of the configuration area.
Click ‘Apply’ when finished.
Product
Overview
Installation
Web
Configuration
Knowledge
Base