Quad Interface External Hard Drive e User Guide English
Contents Introduction 3 Controls, Connectors and Indicators 3 Front Panel Area Rear Panel Area 3 3 About the Hard Drive 4 Locating the Drive on your desk nero BackItUp 4 Essentials software 4 4 Connecting to your computer 5 Disconnecting your Hard Drive 7 For Windows Users 7 For Mac OS Users 7 Technical Support 8 Limited Warranty Terms 8 WEEE Notice 9 FCC Compliance 9 CE Declaration 10 ROHS Compliance 11 2
Introduction Before you begin to use the drive there are a few important things to learn about your new product. Controls, Connectors and Indicators First familiarize yourself with the features of the unit. Front Panel Area The front panel contains only the Activity LED. The circular blue LED will come on to indicate the power-on state. The LED will flash during data access. Rear Panel Area Along the rear panel you will find the ON/OFF switch and interface connectors. Refer to the picture below.
you can press the ON/OFF switch to the ON position to power on the drive. To turn off the drive, press the ON/OFF switch to the OFF position. 3. eSATA Connector. Use this connector to attach the drive to your computer via eSATA. 4. USB Connector. Use this connector to attach the drive to your computer via USB. 5. FireWire 400 Connector: Use this connector to attach the drive to your computer via FireWire 400. 6. FireWire 800 Connectors (two provided).
and then double click the setupx file to start installation. The nero installation window will appear. Follow up the set up wizard to install the software. Note: nero BackItUp Software is only compatible with Windows 2000 / XP / and Vista. Connecting to your computer This Verbatim external hard drive provides four available connection protocols: eSATA, USB, FireWire 400, or FireWire 800.
Note 1: USB under Windows. If you are using a USB 1.1 port on your Windows computer, the following cautionary note may appear on your display: Hi-Speed USB Device plugged into non-Hi-Speed USB hub. This does not indicate a problem because the drive is compatible with both USB 1.1 and USB 2.0 ports. Simply close the message and proceed. However, in this case the drive will operate only at USB 1.1 speeds. Note 2: USB under Mac OS 9.2.x. Mac OS versions 9.2.x do not support USB 2.0 Hi-Speed mode.
Disconnecting Your Hard Drive Your external hard drive is hot-swappable. It can be connected and disconnected without restarting your computer. To disconnect your drive at any time, perform the following steps. You can also disconnect your hard drive at any time while your computer is powered off. Note: Please be careful to follow the correct procedure when disconnecting your unit. Simply unplugging the unit without first following the instructions below may result in damage to your unit and/or loss of data.
Technical Support If you are experiencing difficulty installing or using your Verbatim product, please visit the main Verbatim Technical Support website at www.verbatim-europe.com. From this page you can access our library of user documentation, read answers to frequently asked questions, and download available software updates.
WEEE Notice The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life. The WEEE logo (shown at the left) on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste.
CE Declaration EC DECLARATION OF CONFORMITY It is hereby declared that this product complied with the essential protection requirements of Council Directive 89/336/EEC and its amendments on the approximation of the laws of the Member States relating to electromagnetic compatibility. This declaration applies to all specimens manufactured identical to the model submitted for testing/ evaluation.
RoHS Compliance This product is in compliance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.