User guide

13 User Guide KeySafe 100 Copyright Verbatim Corporation 2005
CAUTION! When you change your password without the Change Password button, your Store
‘n’ Go is formatted and ALL data is lost.
4.3. Changing the Size of the Privacy Zone
CAUTION! Changing the size of your Privacy Zone requires formatting your Store ‘n’ Go,
causing ALL secured and non-secured data to be lost.
To change the size of the Privacy Zone:
1. Click Format in the V-Safe 100 Settings window. The V-Safe 100 Format window is
displayed, as shown in Figure 2 on page 5.
2. Enter the new password and confirm it by entering it a second time.
3. Enter a hint in case you forget your password.
4. Set the new size of your Privacy Zone using the slide bar.
5. Click OK. The V-Safe 100 Format Warning window is displayed, as shown in Figure 3 on
page 6.
6. Click OK to reformat your Store ‘n’ Go and create a new Privacy Zone.
To remove the Privacy Zone:
1. Follow steps 1 to 3 above.
2. Set the size of your Privacy Zone to 0% using the slide bar.
3. Click OK. A message is displayed (Figure 16) warning you that your Store ‘n’ Go will not
have a Privacy Zone.
Figure 16: Removing the Privacy Zone
4. Click OK. The V-Safe 100 Format Warning window is displayed, as shown in Figure 3 on
page 6.