Installation manual

SYSTEM SUPERVISOR AND SUBSCRIBER GUIDE 9.0 VER. 1
1-45
Option Action Indicated
URGENT MSGS ONLY The VP system delivers only messages marked as urgent.
Non-urgent messages are not delivered.
ALL MESSAGES The VP system delivers all messages sent to the mailbox.
Setting this field to DISABLED overrides the field indicating the schedule.
The owner of a mailbox can call in remotely and turn his/her message delivery feature ON or
OFF or change the first number to be called. The other telephone numbers, if in use, cannot
be changed remotely.
VP: Schedule (Page 3 screen)
NTVP: Schedule (Schedule dialog box)
The four schedules (A, B, C, and D) can be applied to any of four features: call transfer,
pager notification, automatic forwarding of new messages, and message delivery. The
feature or features assigned to a schedule operate only between the START and END times for
the days specified.
VP: Start (Page 3 screen)
NTVP: Start (Schedule dialog box)
This field indicates the time at which this schedule begins on the day. Time is indicated in
24-hour format (for example, 8:00 PM is specified as 20:00).
VP: End (Page 3 screen)
NTVP: End (Schedule dialog box)
This field indicates the time at which this schedule ends on the day. Time is indicated in 24-
hour format (for example, 8:00 PM is specified as 20:00).
Note: If you want the schedule to be active all day, enter 00:00 for the START time
and 24:00 for the END time.