Installation manual

SYSTEM SUPERVISOR AND SUBSCRIBER GUIDE 9.0 VER. 1
1-58
If a digit is dialed, the VP system checks the field DIGIT RECEIVED, WAIT FOR MORE
DIGITS:
* If this field is set to NO, the VP system immediately attempts to route the call
based on the single digit dialed. If the DESTINATION FOR DIGIT field contains a
valid box number, the call is immediately sent to the new box. This means that
menu selections take priority over extension numbers (for example, if the
DESTINATION FOR DIGIT 1 is a valid box, the caller cannot dial mailboxes
beginning with a 1, as the VP system routes the call as soon as it received the
first 1 in the extension number).
* If this field is set to YES, the VP system waits to see if the caller is dialing a
sequence of digits (for example, entering a box number). If additional digits are
detected, and they correspond to a valid mailbox, Routing box, etc., the call is
routed to that box. If only one digit is detected, the VP system consults the
DESTINATION FOR DIGIT fields and routes the call to the box specified. Since the
VP system must wait for additional digits, call routing is not executed as quickly
as when this field is set to NO.
DAY-OF-WEEK
The VP system plays the Routing box greeting. Once the greeting ends, the call
immediately routes to the box specified in one of the digit destination fields. On NT-
based VP systems, routing is as indicated on the Routing box screen. On non-NT-based
VP systems, routing is as follows:
Day on Which
Call is Received
Box to Which Call is Routed
Sunday Box specified in DESTINATION FOR DIGIT 1 field
Monday Box specified in DESTINATION FOR DIGIT 2 field
Tuesday Box specified in DESTINATION FOR DIGIT 3 field
Wednesday Box specified in DESTINATION FOR DIGIT 4 field
Thursday Box specified in DESTINATION FOR DIGIT 5 field
Friday Box specified in DESTINATION FOR DIGIT 6 field
Saturday Box specified in DESTINATION FOR DIGIT 7 field