User's Manual

12 13

Thermostat Conﬁguration Thermostat Conﬁguration

Conﬁguring the Equipment Settings - Compressor Type

➤ Use the “Up” and “Down” buttons to change the compressor type by

changing the ﬁrst digit;

0 No Compressor

1 * Heat Pump

2 Air Conditioner

➤ Press the “Fan” button to advance to the next setting;

Entering the room number

Enter the room number by changing the digits on the screen. Leading

zeros “0” preceding other digits will be ignored, i.e. Room number “123”

should be entered as “00123”.

➤ Use the “Up” and “Down” buttons to change the digit;

➤ Press the “Fan” button advance to the next digit;

➤ Press the “F/C” button to advance to the next menu;

Entering room number correctly is crucial for proper operation of

networked thermostats.