Installation Manual
Con guring & Managing Accessories
Accessing the Sensor Setup Menu
With the thermostat and HVAC unit powered, follow the sensor con guration
instructions to correctly con gure the sensors.
➤ Remove the faceplate from the thermostat
➤ Press and hold the con g button until SENS appears on the screen.
CONFIGURATION BUTTON
24 25
Con guring & Managing Accessories
Activating a Sensor
➤ Remove the cover of the sensor(s) to be paired in the room;
➤ Insert one (1) AAA-cell battery into each sensor (not supplied);
➤ Press the button inside the sensor to make the sensor discoverable;*
➤ Press the FAN button to initiate the pairing procedure. This may take up to 30
seconds.
*The sensor(s) will remain discoverable for ve (5) minutes after pressing the button
inside the device. If the pairing process has not been completed within ve (5)
minutes of making sensor(s) discoverable, repeat this step.