Installation Manual

26 27
Con guring & Managing Accessories
Discovering an Active Sensor
The thermostat will display the  rst sensor discovered in the pairing process. Ensure
that the unique device number displayed on the screen matches the unique ID found
on the sensor.
➤ Press the F|C button to pair the discovered sensor to the HVAC Controller.
➤ Repeat this process as necessary for additional sensors.
If the sensor displayed on the screen is not the correct sensor to pair with the HVAC
Controller, use the UP or DOWN buttons to  nd other discovered sensors. To start
over, press the ON/OFF button to exit and refer back to page 24.
Con guring & Managing Accessories
Con gure the Functionality of a Sensor
The thermostat allows the user to change the default functionality of the sensor. Use
the table below to con gure the desired functionality.
➤ Press the FAN button to advance to the next digit;
➤ Press the UP and DOWN buttons to increase or decrease the digit;
➤ Hold the F|C to save sensor settings.
*Indicates default setting.
Functionality Sensor Functionality Code
Occupancy Sensor 100
Sensor with Magnetic
door switch
010*
Temperature Sensor 001