Specifications

22-9058 v2.1
Welcome
PCPanel IP
Cent. Mon. with IP Ref. Topics
9
• The configuration program will search the LAN for the un-programmed IP board and return
the
board’s current settings displayed under the “Information” portion of the config screen.
• To verify them, press the “Get From” (the IP Module) icon on the same tool bar and the same
information should display.
• To connect to an IP Interface Module that has already been configured, click on the “Connect
remotely…” selection; enter the board’s IP address and password (if applicable) and then press the
“Connect” button.
6) Setting Network Parameters
Programming the IP Host Interface for Network Communications
• Press the “System” tab on the left side of the config screen.
• Enter the required information for the IP Host board to communicate:
…continues…